Measuring the Waist

With the pants buttoned and lying flat, and the waistband

pulled taut, measure from the inside edge

of the left side to the inside edge of

the right side, and then double that number.

Measuring the Inseam

Make sure the pant leg is completely straight and flat. Run the tape from the inner crotch to leg opening. Make sure the tape is completely flat and taunt along with pant leg. ** For hemming make sure you add an inch or so for sanforized denim as you will get about an inch to 1.5" shrink after your first soak/rinse** 

Measuring the Front Rise

With the pants buttoned and lying flat, and the waistband pulled taut, measure from the crotch seam to the top of the waist band.

Measuring the Back Rise

With the pants buttoned and lying flat, and the waistband pulled taut, measure from the crotch seam to the top of the waist band.

Measuring the Thigh

With the pants lying flat, measure from the inside of the leg to the outside of the leg, below crotch seam. Make sure denim is flat and tape is taunt. 

Measuring the Leg Opening

With the pants lying flat, measure straight across the bottom of the leg.

Measuring the Chest

With the shirt buttoned and lying flat, measure straight across the chest, from armpit seam to armpit seam, and then double that number.

Measuring the Shoulders

With the shirt buttoned and lying flat, measure straight across the shoulder seam.

Measuring the Sleeve

With the shirt buttoned and lying flat, measure along the outside of the sleeve, from the shoulder seam to the tip of the cuff.

Measuring the Length

With the shirt buttoned and lying flat, measure straight up the back, from the edge of the bottom to the base of the collar.